HITEC Blizzard User Manual

Page 3

# 21 4233

Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you
are completely satisfied with the contents of your kit. However, we would ask you to check all the parts before you start
construction, referring to the Parts List, as we cannot exchange components which you have already modified. If you find any
part is not acceptable for any reason, we will readily correct or exchange it once we have examined the faulty component. Just
send the offending part to our Model Department. Please be sure to include the purchase receipt and the enclosed complaint
form, duly completed.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in
terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we
cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.

Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings in the usual sense of the term. Building
and operating them safely requires a certain level of technical competence and manual skill, together with discipline and a
responsible attitude at the flying field. Errors and carelessness in building and flying the model can result in serious
personal injury and damage to property. Since we, as manufacturers, have no control over the construction, maintenance
and operation of our products, we are obliged to take this opportunity to point out these hazards and to emphasise your
personal responsibility.

Additional items required for the “Blizzard”:

MULTIPLEX receiving system components for the Blizzard

RX-7-Synth IPD receiver

35 MHz A-band

Order No. 5 5880

RX-7-Synth IPD receiver

35 MHz B-band

Order No. 5 5881

alternatively:

40 / 41 MHz band

Order No. 5 5882

Nano-Karbonite servo

2 x required (ailerons)

Order No. 6 5118

Nano-S servo

1 - 2 required (elevator (rudder))

Order No. 6 5120

Optional separation filter lead, 200 mm UNI (for speed controller)

4 x 200 mm UNI servo lead (2 x central connector, 2 x elevator servos)

Order No. 8 5133

1 x High-current plug (green)

Order No. 8 5213

1 x High-current socket (green)

Order No. 8 5214

Battery charger:

MULTIcharger LN-3008 EQU

Order No. 9 2540

for LiPo, LiIo and LiFe batteries (2S / 3S) and NiMH
and NiCd batteries (four to eight cells)

Blizzard power set:

Order No. 33 2639

Contents:
Himax 3510-1100 motor, BL-37 II speed controller, 9 x 7” folding
propeller, taper collet, driver and 39 mm Ø spinner

Blizzard TUNING power set:

Order No. 33 2643

Contents:
Himax 3516-1350 motor, BL-54 speed controller, 9 x 6” folding
propeller, taper collet, driver and 39 mm Ø spinner

Flight battery:

Li-Batt BX 3/1-2100

Order No. 15 7131

Li-Batt BX 3/1-2500

Order No. 15 7191

Receiver battery for glider version

4/2100-AA-W

Order No. 15 6052

Tools:
Scissors, balsa knife, combination pliers, screwdriver.

Note: please remove the illustration pages from the centre of the instructions.

Specification:

Wingspan:

1380 mm

Overall length:

910 mm

All-up weight, glider:

approx. 735 g

All-up weight, electric:

approx. 820 / 925 g / Standard / Tuning

Total surface area:

19.4 dm²

Wing loading min.:

38 g/dm² glider, 42 g/dm² electric, 47 g/dm² electric (Tuning)

RC functions:

Aileron, elevator, (rudder), motor