Hamilton Buhl HDV5200-1 - Manual (Page 31)

31
overheated, recharging must be stopped.
‚ If the video camera is not in use for a long period, the battery should be
removed.
‚ If AC adapter is overheated during its use, it should not be used any
longer.
‚ Avoid shock or impact on the battery or AC adapter
‚ Avoid unexpected accidents, the battery and AC adapter should be
placed out of children’s reach,
‚ Aged batteries should be recycled according to related regulations of the
State to protect environment.
7.4 Troubleshooting
Symptoms Possible Causes Solutions
No response when
power button is
pressed. z The battery has low
voltage.
z The AC adapter does
not supply the voltage
normally.
z Replace it with a new one.
z Check if AC adapter and
supply socket are normal.
The video camera
suddenly stops
during operation
after operating for
some time.
z The battery has low
voltage.
z No battery is inside the
video camera or AC
adapter is powered off.
z Replace or recharge the
battery
z Check if AC adapter works
normally.
The video camera
suddenly stops
during operation
after having not
operated for some
time.
z It has been in standby
state for a long period
and automatically
switches off.
z Restart the video camera.
z Disable automatic switch-
off.
The battery is used
up very soon
z It is not fully recharged
z It is aged. z Correctly recharge the
battery to full capacity
z Replace it
The video camera
gives an error
message after SD
card is inserted. z The card is not
formatted
z Bad contact
z Format it
z Clean card contact and
reinsert it.
Flash does not work. z The battery has low
voltage
z It is set to flash off
mode.
z Correctly recharge the
battery to full capacity
z Change Flash mode