Hamilton Buhl SL-930 - Manual (Page 2)

www.HamiltonElectronics.com 2
Congratulations on purchasing the Hamilton SoundPoint Lectern and Table Top Amplifier Kit
with Mic and Table Top Speakers. This quick‐setup guide will have you projecting powerful
sound in just a few minutes.
Kit Contents:
1. Hamilton lectern amplifier
2. 110‐240v power supply with
3‐prong power cord
3. Flat‐Panel speaker with
attached wire
4. Battery box for amplifier
5. Gooseneck Microphone
6. Velcro for mounting
amplifier
7. Mounting hardware for Mic
8. Microphone windsock
Quick Setup Instructions:
1. Turn lectern amplifier upside‐down and
insert the threaded microphone mount in
through the bottom. It will push out a blanking
plug and pop‐out the top of the amp.
2. Turn the amp right‐side up and lock the
microphone mount in place using the threaded
metal ring. Do not over‐tighten.