Hamilton Buhl ALS-600 User Manual
Page 3
ALS-600 Transmitter (Front Panel)
POWER
SIGNAL
Hamilton Electronics
ALS-600 Transmitter
75.5
MHz
4
5
6
13
ALS-600 Transmitter (Rear Panel)
MIC IN
LINE IN
2
1
3
ANT
DC
12V
3
SETTING UP THE TRANSMITTER
LINE-IN
MICROPHONE INPUT
POWERING THE TRANSMITTER
The 1/4''
jack
on the rear of the transmitter enables you to connect directly
from an audio source such as a tape player.
the 1/4'' jack
on the back panel is designed to accept either
dynamic or electret microphones.
Connect the AC adapter provided into the 12V DC jack
on the back panel of the
transmitter. Plug the other end into an AC wall socket.
Press power switch
on, the power on LED
will show power is getting to the
system.
The transmitter's ''signal ''LED
will illuminate to confirm that the transmitter is
broadcasting.
•
•
1
2
3
4
6
5