Hall Research AD-340 - Manual (Page 8)

Model AD-340
6
3 Configuration & Operation
3.1 Front-Panel Button Operation
Button Function Description
(1) POWER Standby
Power On/Off Standby mode = USB inactive,
Audio non-functional (to
completely turn the unit off,
disconnect the power supply)
(4) SELECT Select ANALOG or
DIGITAL Input (2) Red LED = DIGITAL
(3) Green LED = ANALOG
(4+8) SELECT + UP
or
(4+9) SELECT + DN Select DELAY
TYPE
(toggle function)
Display shows:
SEC = Millisecond
FEE = Feet
d1S = Meter (Distance)
F50 = Video Frames 50 Hz
F60 =Video Frames 60 Hz
(8) UP Increase Increase value by 1
(8) UP held down Increase Increase value by 10
(9) DOWN Decrease Decrease value by 1
(9) DOWN held
down Decrease Decrease value by 10
(8+9) UP+DOWN Set to Zero Set Delay Values to ZERO
(5) 7-segment LED Display values (6) Red LED = Time (ms)
(7) Green LED = Distance (ft/m)
No LED = Frames
•
When the Host PC GUI is active, configurations can be made from
either the Front Panel or the Software GUI. All configuration changes
are completely synchronized in real-time.
•
The Unit will automatically memorize the current delay settings, audio
type, ADC/DAC gain settings and the mute status.