Gryphon Mojo - Manual (Page 9)

The speaker terminals are
Gryphon's proprietary 5 way
terminals used on Gryphon
products such as the Poseidon
and Colloseum products.
The Mojo basic stand
The mojo stand places the
speaker at the correct height
for most people. We recommend
filling the stand with sand for
added mass and damping. A
set of adjustable spikes with
coasters are also provided, en-
suring an effective evacuation
path for vibration.
low distortion and with a total
absence of compression.
A categegory of tweeter rare-
ly found in monitor-sized speak-
er systems.
The Crossover
The Mojo crossover is a show-
case of carefully chosen or pur-
pose manufactured compo-
nents. The extreme Graphite
resistors from Duelund Coherent
Audio, hand-made inductors
from the famous Danish
Jensen company and excellent
low-memory, precision capa-
citors from Germany are all
hardwired with special Teflon
hard-insulated silver solder.
Parts such as the entirely
hand-made Duleund resistors
and the Jensen inductors are
components rarely found in
commercial speakers because
of their
pro-
hibiti-
ve cost,
but they
are well known
and used in the
hardcore DIY communi-
ty. Due to the intrinsic
high pass roll off of the rib-
bon tweeter, the filter is
fourth order for the tweeter
and the bass units to ensure
phase continuity at all
frequencies.
Jensen paper/oil inductor
Duelund graphite resistor
Mojo crossover / back plate