Glow-worm Flexicom sx - Manual (Page 12)

0020127399_00 - 06/11 - Glow-worm
HOW TO USE YOUR APPLIANCE
- 12 -
ANY ASSISTANCE?
9 Fault Finding
9.1 Electrical circuit interruption
The boiler will not work without an
electrical supply and normal operation
of the boiler should resume when the
electrical supply is restored.
If the boiler does not resume normal
operation, check the external controls.
It may be necessary to restart your
appliance.
• To restart the boiler, press the reset
button, see chapter "How to use your
appliance ► Overview".
9.2 Appliance fails to light
The LCD will display a flashing 'F' and
code number,
• To restart the boiler, press the reset
button, see chapter "How to use your
appliance ► Overview".
If any fault persists, and your appliance still
does not work, leave it switched off and
contact your competent person.
CODE DESCRIPTION POSSIBLE CAUSES
F1 Boiler has attempted to
light 5 times and failed on
all occassions
Press the reset button.
If the fault persists, contact your Installation/Servicing
company or Glow-worm
F5 Overheat Boiler has overheated - allow to cool then press reset button
Like all condensing boilers
it will produce a plume of
condensation from the flue
terminal in cool weather.
This is due to the high
efficiency and hence low flue
gas temperature of the boiler.
It is normal and not a fault
indication.