Glow-worm Flexicom cx Analogue Timer Kit - Manual (Page 2)

These instructions consist of, Instructions for Use and Installation Instructions.
The instructions are an integral part of the appliance and must, to comply with the current issue
of the Gas Safety (Installation and Use) Regulations, be handed to the user on completion of
the installation.
These instructions are for the installation and use of the Analogue Timer
Kit, Part No. 0020037830.
These instructions must be read in conjunction with the boiler
instructions.
The electrical installation must be installed by a competent person and in
accordance with the relevant standards.
CONTENTS OF KIT
Customer Service:
01773 828100
Technical Helpline:
01773 828300
General and Sales enquiries:
Tel. 01773 824639
Fax: 01773 820569
All wiring to current I.E.E. wiring regulations.
Isolate the boiler from mains power and gas supply.
Benchmark places responsibilities on both manufacturers and installers. The purpose is to ensure that customers are provided with the correct equipment
for their needs, that it is installed, commissioned and serviced in accordance with the manufacturer’s instructions by a competent person approved at the
time by the Health and Safety Executive and that it meets the requirements of the appropriate Building Regulations. The Benchmark Checklist can be used to
demonstrate compliance with Building Regulations and should be provided to the customer for future reference.
Installers are required to carry out installation, commissioning and servicing work in accordance with the Benchmark Code of Practice which is available
from the Heating and Hotwater Industry Council who manage and promote the Scheme.
Visit www.central heating.co.uk for more information.
18 17
16
15
14
13
12
11
8
19
20
21
22
23
24
10
9
7 6 5
4
3
2
1
1
1 - Timer Kit Body
2 - Timer Kit Harness
3 - Installation/User Instructions
2
3
0020136593 - 01/12 - Glow-worm
- 2 -
INTRODUCTION
EN