Glow-worm Clearly Hybrid - Compact Hydraulic Module - Manual (Page 9)

0020096882_02 - 08/10 - Glow-worm - 7 -
ANY ASSISTANCE?
7 Appliance safety devices
• In case of the risk of frost, make
sure that the electrical supply to the
appliance is turned on.
8 Appliance maintenance and
servicing
By failing to observe the above, and
notwithstanding the risks to safety and
your own responsibility in the event of non
compliance, you risk a being subject to a
fine.
8.1 Cleaning
e Before cleaning turn the
appliance off.
• The appliance casing can be cleaned
using a mild liquid detergent with a
damp cloth, then a dry cloth to polish.
i
Do not use any form of
abrasive or solvent cleaner
as you may damage the
paintwork.
• Periodically check that no obstacles
(cardboard, twigs, leaves ...) are
impeding ventilation around the
appliance.
8.2 Regular servicing
Regular servicing of the appliance is
important to the prolonged, safe and
efficient use of your appliance.
i
Incorrect or inadequate
servicing can severely affect
the safety of the appliance and
can lead to injury.
We recommend that your appliance is
serviced every year.
• Only use a competent person.
The service engineer should complete
the relevant Service Record on the
Benchmark Checklist after each service.
The Benchmark Checklist may be
required in the event of any warranty
work and as supporting documentation
relating to home improvements in the
optional documents section of the Home
Information Pack.
• To obtain service, please call your
installer or Glow-worm’s own service
organisation.
8.3 Spare Parts
In order to guarantee the safe and
prolonged life of the product, insist that
only the manufacturer’s genuine spare
parts are used.
• Do not use reconditioned or copy parts
that have not been clearly authorised
by Glow-worm.
• If replacement parts are required
contact Glow-worm’s own service
organisation for advice using the
telephone number below.
Tel: 01773 596510
or for approved stockist, visit
www.glow-worm.co.uk.
• Please quote the name and model of
the appliance.
8.4 Sealed Water Systems
The draining, refilling and pressurising
MUST be carried out by a competent
person approved at the time by the Health
and Safety Executive.
ANY ASSISTANCE ?