E-Z-GO EXPRESS S4 HIGH OUTPUT - Manual (Page 58)

MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
5 - 8
5
LIGHT BULB REPLACEMENT
To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean, dry tissue or
paper towel to handle the glass portion of the bulb.
For vehicles equipped with lights mounted in the cowl, locate bulb socket on backside of light and turn bulb socket a
quarter turn counterclockwise to unlock and pull out bulb and socket. Insert new bulb and rotate socket a quarter turn
clockwise to secure.
Similarly replace the turn signal light bulb, locate bulb socket on backside of light bar and turn bulb socket a quarter turn
counterclockwise to unlock and pull out bulb and socket. Insert new bulb and rotate socket a quarter turn clockwise to
secure..
To replace the tail and brake light bulb, remove hardware securing lens and remove lens. Install replacement bulb.
FUSE REPLACEMENT
To replace fuses, locate the fuse block under the driver side seat. Pull out old fuse and replace with a new automo-
tive type fuse. Headlight and taillight bulbs and fuses are available from a local Distributor, an authorized Branch or
the Service Parts Department.
Rear
Fender
Tail Light
Lens
Tail Light
Bulb
Inside
of Cowl
Headlight
Bulb
Headlight
Casing
Screw