Dynacord M 15 - Manual (Page 19)

18 19
SPECIFICATIONS
Technical Specifications: M15
Internal amplifier at rated conditions, all power ratings at minimum speaker impedance (LO 6 ohms /
HI 12 ohms), unless otherwise specified.
System and Cabinet Specifications:
SPL 1W/1m 100dB
Max. SPL 1m (Calculated) 128dB
Frequency Range (-10dB) 50Hz…..19kHz
Low Frequency Transducer Electro-Voice EVX 155 (359561)
High Frequency Transducer Electro-Voice ND6-16 Driver
(361663)
High Frequency Horn Electro-Voice HP8055 80°x55°
(345799)
Dimensions (W x H x D) 430 x 630 x 432 mm
Weight 38 kg
Power Amplifier -, Inputs - and Crossover - Specifications
Max. Dynamic Output Power (IHF-A) LO 540W
HI 160W
Max. Continuous Output Power LO (THD=1%, 400Hz) 460W
HI (THD=1%, 4kHz) 140W
Power Amplifier Design High Efficiency, Class H
THD+N, rated < 0.01%
Input Impedance (balanced) 20kohms
Level Control -oo … +6dB
Crossover
Mode Switch
Fullrange, positive polarity
Mid-High, positive polarity
(from serial #: 10211)
24dB/Octave Linkwitz-Riley 124Hz
Cooling Convection cooled, passive
Protection Audio limiter, High temperature, DC,
HF, Back-EMF, Peak-current limiters,
Inrush current limiter, Turn-on delay,
Thermal (Speaker & Amplifier)
Power Requirements 100V, 120V, 230V, 240V
50Hz, 60Hz
Power Consumption 260W @ 1/8 max. output power
Warranty 36 months