Denon DN-A300M User Manual

Page 8

ENGLISH

Connections

Connecting the power cord

AC 120 V, 60 Hz

AC outlet

(wall)

Connecting to the AC OUTLETS

• SWITCHED :

The power supplies from the SWITCHED outlets
turns on and off together with the main unit's
POWER switch.

• UNSWITCHED :

The power always supplies from the
UNSWITCHED outlet unless the power cord is
unplugged.

• Make sure the total power consumption of the

connected devices does not exceed 120W(1A).

NOTE:

• Only use the AC OUTLETS for audio equipment.

Never use it for hair driers, TVs or other electrical
appliances.

• Insert the plugs securely. Incomplete

connections will result in the generation of noise.

Power cord

(included)

Connecting Recorders

Speaker

(A)

Connecting Players and Speakers

Speaker

(B)

AUDIO OUT

Ground wire

• Only Turntables fitted with a

MM (Moving Magnet) cartridge
can be used with this unit. If
you have an MC (Moving Coil)
cartridge you will need to use a
commercially available head
amplifier or step-up transformer.

• If humming or other noise is

generated when the ground
wire is connected, disconnect it.