Electrocompaniet PI 2 - Manual (Page 6)

Technical specifications PI-2
The following technical data were measured on randomized test objects and are typical data.
All measurements are made at 120V / 240V // 50Hz / 60Hz
Measurements
Input impedance 47 kOhm
Output impedance 0,03 Ohm
Noise floor (0 dB gain) < -100 dB
Frequency response 1 – 200 kHz
Channel separation > 120 dB
THD + N < 0.006%
Maximum peak current > 40A
Damping factor > 250
Rated output power THD = 0,2%
8 ohm 2 x 100 W
4 ohm 2 x 150 W
2 ohm 2 x 220 W
Power consumption (no load or signal) 100 W
Dimensions
Width
420 mm
Depth 340 mm
Height 70 mm
Weight 14 kg
Specifications subject to change without further notice.