Electrocompaniet PC 1 - Manual (Page 4)

How to connect your system
See illustration 1.
Outputs
Balanced analogue operation:
Use an XLR interconnect and connect the right and left outputs on the PC-1 to the right and left
inputs on the integrated amplifier or preamplifier
S/P Dif digital operation:
Use a 75 ohm coaxial digital cable from the PC-1 to the digital input on your DAC.
Front panel
See illustration 2.
The main switch is located on the left side of the front panel.
The four buttons on the right-hand side of the front panel is used to play, stop, eject and skip to
previous/next track.
Function
Button
Play Up button
Stop Down button
Eject Down button (hold button pressed until tray
eject)
Previous track Left button
Next track Right button
Navigator window
This window in the middle of the front panel what track that is currently playing.
How to power up your system
You should always power up your system in the following way:
First turn on the PC-1, and then turn on the amplifiers.
When switching off your system
First turn off the amplifiers, and then turn of the PC-1.