Electrocompaniet REC4.5 - Manual (Page 9)

Technical Specifications EC4½ :
The following technical data were measured on randomised test objects and are typical
data. All measurements are made with the following equipment:
Distortion analyser: Tektronix AA501
Oscilloscope: Tektronix 468
Oscillator: Tektronix SG505
Frequency counter: Rascal 9838
Phase meter: Hewlett Packard 3575A
Preamplifier section
Single ended operation (gain)
0 dB
Balanced operation (gain) 6 dB
Input impedance 50 kOhm
THD single ended (1.5 V output) < 0.003 %
THD balanced (1.5 V output) < 0.0015 %
Max. input > 10 V RMS
Channel separation (1 V output, 1 kHz) > 90 dB
Output impedance 100 Ohm
Max. output Single ended 8 V RMS
Max output Balanced 16 V RMS
Output noise 400 Hz - 30 kHz input shorted
Single ended : 6 µV
Balanced : 11 µV
Power consumption (no load or signal) 15 W
Dimensions
Width
483 mm / 19 inches
Depth 240 mm / 9.5 inches
Height 70 mm / 2.8 inches
Weight 5 kg. / 11 lbs.
The manufacturer reserves the right to alter these specifications without further notice.