Electrocompaniet AW180 - Manual (Page 7)

Technical Specifications AW180M:
The following technical data were measured on randomised test objects and are typical
data.
Amplifier section
Main voltage 120 V / 240 V. Clipping point of the amplifier is set to a level where total
harmonic distortion (THD) is 0.2 %.
<
Output Impedance (20 Hz - 20 kHz) 0,008 Ohm
RCA (single) input impedance 220 kOhm
XLR (balanced) input impedance 110 kOhm
Input sensivity for rated output 1 V
Max. peak current > 100 A
THD (measured at 1 kHz half power 8 Ohm) < 0,001 %
THD (measured at 1 kHz -1 dB, 8 Ohm) < 0,001 %
Noise (measured with both inputs shorted)
400 Hz - 30 kHz : 90 µV
10 Hz - 30 kHz : 100 µV
2
Rated output power
10 % change in line voltage will give app. 20 % change in output power.
8 Ohm 250 W
4 Ohm 380 W
2 Ohm 625 W
Power consumption
(no load or signal) 115 W
Dimensions
Width 215 mm / 8.5 inches
Depth 470 mm / 18.5 inches
Height 285 mm / 11.2 inches
Weight 2 kg. / 48.4 lbs.
The manufacturer reserves the right to alter these specifications without further notice.