Easyrig 5 Vario - Manual (Page 6)

6
Fig. 4b
You can adjust the line tension for different
camera weights by using the 6mm adjustment
tool. Turn clockwise to add more tension to the
line or counterclockwise to reduce the amount
of tension. The faster the camera descends, the
more weight there will be on your shoulder,
(less line tension.) Observe, the adjustment tool
will move as the line is pulled down. Remember,
“righty tighty, lefty loosy.“
Fig. 5
Check again to make sure your camera is
supported properly. Repeat step 4b if necessary.
Fig. 6
Put on your Easyrig vario 5 vest. Adjust the
waist belt snugly to ensure the weight sits
firmly on your hips. Then set the other vest
adjustments to make sure your Easyrig vario
5 is comfortable and and gives you the proper
amount of support.
Fig. 7
Attach your camera to the Easyrig vario 5 hook.
Loosen the lock knob and use your middle finger
to open the hook. Once attached to your camera
handle, secure the hook by turning the lock
knob clockwise.
4b
5
6
7