EarthQuake 6015V - Manual (Page 10)

Operator’s Manual
6015 Series CRT Rototiller
10 Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
ATTACH HANDLE BAR (U.S. MODELS)
1. Locate handle bar extensions. SEE FIGURE 2
2. Place handle bar extensions on outside of lower handle bar
mount. Line up the handle bar extension pieces with the
lower handle bar mount as shown in the decal located on
the lower handle bar mount next to the mounting location.
SEE FIGURE 2
3. Insert one 3/8-16 x 1 3/4” bolt for each side in lower holes of the
extension pieces. The bolts will pass through the lower hole of
the lower handle bar mount. Put 3/8” flat washers onto bolts.
NOTE: Always put washers on the tubing side of bolts.
4. Hand tighten 3/8-16 nuts on each bolt.
5. Now assemble the handle bar to the handle bar extensions.
Note: Handle bar goes to the outside of the handle bar
extensions.
6. Insert one 3/8-16 x 1-3/4” bolt for each side in lower holes of
the handle bar. Note: Bolts will be going through the upper
holes of the lower handle bar mount along with the middle
holes of the extensions. Put 3/8” flat washers onto bolts.
7. Hand tighten 3/8-16 nuts on each bolt.
8. Insert one 3/8-16 x 1 bolt for each side in upper holes of
the handle bar. Bolts will pass through upper holes of the
extensions. Put 3/8” flat washers onto bolts.
9. Hand tighten 3/8-16 nuts on each bolt.
10. Tighten 3/8-16 nuts on each of the 6 bolts connecting the
handle bar, handle bar extensions and handle bar mount
together.
ATTACH HANDLE BAR (CE MODELS)
1. Locate CE handle bar extensions. SEE FIGURE 3
2. Place CE handle bar extensions on outside of lower handle
bar mount. Line up the handle bar extension pieces with the
lower handle bar mount.
3. Insert one 3/8-16 x 1 3/4” bolt for each side in lower holes. Put
3/8” flat washers onto bolts.
4. Start 3/8-16 nuts on each bolt.
5. Insert one 3/8-16 x 1-3/4 bolt for each side in upper holes. Put
3/8” flat washers onto bolts.
6. Start 3/8-16 nuts on each bolt.
7. Tighten 3/8-16 nuts on each of the 4 bolts connecting the
handle bar extensions to the lower handle bar.
8. CE handle bar extensions should now be securely assembled
to the lower handle bar mount.
9. Now assemble the handle bar to the CE handle bar extensions.
Note: Handlebar goes to the outside of the handle bar
extensions.
10. Insert one 3/8-16 x 1 bolt for each side in lower holes.
11. Start 3/8-16 nuts on each bolt.
12. Insert one 3/8-16 x 1 bolt for each side in upper holes.
13. Start 3/8-16 nuts on each bolt.
14. Tighten 3/8-16 nuts on each of the 4 bolts connecting the
handlebar to the handlebar extension.
FIGURE 2
handle bar extensions
handle bar
lower handle bar mount
FIGURE 3
CE handle bar extensions
handle bar
lower handle bar mount