EarthQuake 3365PS - Manual (Page 7)

Operator’s Manual
Front Tine Tiller 3365 Series
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST 7
FEATURES
The advantage of the EARTHQUAKE™ gear drive front tine rototiller over other front tine tillers is the exclusive unfolding and
flexible drag bar. This gives the tiller its stability and versatility. For easy transport, fold the wheels under the engine. During opera-
tion, the wheels unfold back and the drag bar folds down. The long length between the tines and the drag bar make this the most
comfortable front tine tiller on the market.
front belt cover
hand knob Transport Position
Operating Position
MODEL 3365H
BUMPER ASSEMBLY
drive control lever
3-way adjustable
tine widths
INSTALL DEPTH REGULATOR LEVER
1. Install the depth regulator lever through hole in bracket from the
bottom up with curve to rear of unit and secure with detent pin.
3365H - ADDITIONAL ASSEMBLY
1. Use the (2) 1/4-20 x 3/4” bolts, (2) 1/4” washers and (2) 1/4-20 nuts
to fully attach the bumper through the upper wholes. See bumper
assembly figure.
2. Use the (2) zip ties to secure the On/Off switch cable to the handlebar.
See zip tie assembly figure for suggested locations.
MODEL 3365H ZIP TIE ASSEMBLY
zip tie
zip tie
2-position
large wheels
tine shield