Unpacking and assembly, Install the depth regulator lever, Fill engine crankcase – EarthQuake 3200 User Manual
Page 10
10
ARDISAM
UNPACKING AND ASSEMBLY
INSTALL THE DEPTH REGULATOR
LEVER
1. Install the depth regulator lever through hole in bracket
from the bottom up with curve to rear of unit and
secure with detent pin.
FILL ENGINE CRANKCASE
1. Add oil according to engine manual. Do not overfill.
Use a clean, high quality detergent oil. Container must
be marked A.P.I. Service SF - SJ. Use no special
additives with recommended oils. Do not mix oil with
gasoline. Oil level must be full. Check the oil level by
removing the oil fill plug. Oil level should be up to the
bottom of the fill plug opening.
2. Always check oil level before starting engine. Refer to
engine manual for capacity and type of oil to use.
depth
regulator
lever
detent pin
Engine is shipped from factory without oil. You
must add engine oil before starting engine.