EarthQuake E43 User Manual
Page 8
Page 8
ASSEMBLY INSTRUCTIONS ANd PARTS ExPLOSIONS
E43 Model
GetEarthquake.com
800-345-6007
Warm Engine Start:
1. Move choke lever to
ChOkE position.
note: Choke position is defined by moving the choke
lever as far to the Choke position as possible.
2. Continue with Step 4 of Cold Engine Starting.
hot Engine Start:
1. Continue with Step 4 of Cold Engine Starting.
2. If engine does not fire, refer to Step 1 of Warm Engine
Starting.
dO NOT attempt to start engine in the following ways:
• dO NOT use starting fluid.
• dO NOT spray flammable liquids or vapors into air cleaner,
carburetor or spark plug chamber.
• dO NOT remove spark plug and pull on starter rope. Flam-
mable fuel can spray out & ignite from a spark from spark
plug.