DeLonghi KS3300M - Manual (Page 4)

Citrus juicer KS3000
4
NB: the pulp density selector enables the quantity of pulp in the
juice to be regulated by making the holes in the filter smaller or
larger.
To reduce the amount of pulp, move the juice density selector
left as far as it will go.To increase the quantity of pulp, move the
selector to the opposite side (fig. 5).
Important: never use the appliance continuously for more than
four minutes.
• When you have finished juicing, to reduce drips, move the non-
drip spout to the raised position (fig. 6).
Cleaning and maintenance
• This appliance should not require any maintenance. However,
before attempting to clean the appliance, unplug from the mains
socket.
• Remove the filters, dome and juice container by pulling
upwards.
• Remove all waste and clean the components.
• To avoid residues drying on, take the appliance to pieces and
clean the components immediately after use.
• Wash the juice container, filters, cone and cover in warm water and
detergent. None of the components can be washed in a dishwasher.
• Clean the motor base with a damp cloth.
NB: to facilitate cleaning, the non-drip spout can be removed
from the container by rotating the spout outwords and pulling
lightly; then replace.
Safety Warnings
Please read these instructions before operating and retain for
future reference.
• After having removed the appliance from the packaging, make
sure that it has all of its components. If there is any doubt, do
not use the appliance and return it to be checked by qualified
personnel.
• The plastic bag containing the appliance should be kept away
from children as it may represent a suffocation hazard.
• In the case that the plug is not compatible with the electrical
outlet being used, have it substituted with a suitable one by
qualified personnel. The use of adapters, multi-way plugs, and/or
extension cords is not recommended. Whenever their use
might become necessary, use simple or multiple adapters and/or
extension cords conforming to the safety laws, taking care to
not exceed the power limits marked on the adapter or the
extension cord.
• Should the appliance stop working, go to an authorised service
centre.
Fig.5
Fig.6