Dv Mark Galileo 15C - Manual (Page 5)

5
volumes.
12) RIVERBERO
– Level control for the onboard Accutronics® spring reverb.
13) POWER – This switch delivers AC power to the amp. Make sure the unit is grounded; all three terminals of the AC power plug must
be connected to avoid any injury to the user or damage to the unit. DV Mark amps and combos are manufactured to be used in the country
where they have been sold, and are factory preset to that country’s voltage. So make sure you’re sending the correct voltage to your amp
before you connect it to AC power.
14) STANDBY
– Before powering on, make sure this switch is in standby position. Between sets or whenever you’re on a break from
playing, put the amp in standby position.
INPUT
0 MAX
BASS MIDDLE HIGH GAIN
0 MAX
MASTER
0 MAX
RIVERBERO
0 MAX STANDBY BOOST
OFF
COMBO GALILEO 15
TOTAL 4 Ω
OR 8 Ω + 8 Ω 8 Ω
DO NOT OPERATE THIS
AMPLIFIER WITHOUT
CONNECTING LOUDSPEAKERS
0 MAX
1
2
3 4 5 6 11
7
8 9 10
12
13
14