Dillon Precision Big-Fifty User Manual
Page 7
PART# 29023
3/8/2010
7
TO BEGIN RELOADING
The Dillon “Big Fifty Reloader” or “BFR” is semi-progressive four-station press. The
press can either be set up to rotate in a clockwise or counter-clockwise direction allowing
the user some flexibility in their reloading process. As offered by the entire line of Dillon
products, the machine has the capability of interchangeable tool heads to allow the user
to have multiple setups for the machine.
Changing the Toolhead will require the removal of the three Toolhead Bolts, then lift
the Toolhead straight up and off of the three Uprights. To replace the Toolhead simply
place it back on the three Uprights aligning the pockets on the bottom of the Toolhead
and the steps on the top of the Uprights. It may be necessary to loosen the lower right
front Upright mounting bolt to get the Toolhead to seat fully. Replace and tighten the
Toolhead Bolts (35-40 ft/lbs torque).