Dillon Precision RF 100 - Manual (Page 3)

General Information
Your primer filler is shipped ready to
fill either large or small primers. If you
are going to load small primers or stan-
dard large, then your machine is ready
to load, right out of the box. NOTE:
Remington primers require the use of the
‘B’ stabilizer plate (#17295). Large mag-
num rifle primers require an adjustment.
(see section Large Magnum Rifle on
page 5)
The primer filler machines come color
coded: red components for large primers,
blue components for small primers.
Fig #1 Insert the “clip end” of the col-
ored filler tube into the base, then press
down.
Fig #2 The top of the colored tube will
locate in the colored plastic adapter.
Operation: Plug your primer filler into
a 110 volt AC power supply/generator.
The power is turned on by the red rocker
switch on the cord.
Fig #3 Now that the power has been
turned on, each time the blue button is
depressed the machine will run for two
minutes and then shut off. If there are
still primers remaining in the bowl after
the two minutes have elapsed, all you
need to do is press the blue button
again.
Loading Primers
1. Fig #4 Slide the cardboard jacket
back so that one half of the first row of
primers is visible.
Fig. 3
Fig. 1
Fig. 2
Fig. 4
3
RF 100 Primer Filler, May 2007 5/22/07 9:35 AM Page 3