Digiframe DF-F1507c - Manual (Page 10)

10
Other Functions
Copying/Deleting Files
On the main screen, select the memory device where file(s) are to be copy/delete from. Then select “File”
icon on the second screen and press “Enter”.
Connecting to PC
*Note: After copying or deleting files to and from the frame, make sure to use the “Safely Remove Hardware” on the computer.
Click on this icon Click on the appropriate drive (D, E, etc) Now you can remove the Frame from the PC
Use ▲▼ buttons to select the file you
want to copy/delete, press ► to select
file(s) and confirm.
Press the OSD button, use ▲▼ to highlight
“Copy” / “Delete” and press “Enter”.
Select the destination and press ►, select
folder then press “Enter” to confirm.
(For copying only) Once copying or deleting is complete, OSD
will display “complete” as shown above.
Use the supplied USB cable to connect
the photo frame to your
PC.
(Use supplied USB extender when using
both USB port for convenience).
After connecting to PC, unit screen will display
the status connection as what shown above. You
can now copy or delete files to and from your
digital frame or any connected memory device.