Digiframe DF-F7012t - Manual (Page 12)

12
12. Brightness
– Contrast – Color & Tint
Use these options to adjust the image display properties
13. Alarm
To enable the alarm,
(1) Press SETUP
button to select “SetTime/Set Alarm” and then
press the
“ENTER” button to confirm.
(2) Press UP and DOWN
button to select “Set Alarm”.
(3) Press the LEFT and RIGHT
button to select “OFF” and then
press the UP / DOWN
button to change “OFF” to “ON”.
(4) Press the LEFT and RIGHT button to select among the time
setting items
– hour, minute, second. Press the UP and DOWN
button to set the time item.
(5) press the
“ENTER” to confirm the alarm time. The alarm
should ring at the specified time every day.
NOTE: The frame must be on for the alarm to go off
16. Time
To setup and Save the Time and Date Settings
(1) Press the UP and DOWN buttons to select among the time
setting items
– Year, Month, Day, Hour, Minute, Second.
(2) Use the LEFT and RIGHT buttons to adjust
(3)
Then move down to “Save Time” to confirm these settings