Deltech Fitness DF7600- Pro Olympic Weight Tree - Manual (Page 3)

TOOLS REQUIRED:
METRIC SOCKET SET OR WRENCHES
INSTRUCTIONS:
ATTACH THE SUPPORT LEGS (B) TO THE BODY (A) USING M12 BOLTS (C), M12 WASHERS
(D), AND M12 LOCK NUTS (E).
MAKE SURE ALL THE BOLTS ARE TIGHT BEFORE USE. REMEMBER TO CHECK THEM
PERIODICALLY TO MAKE SURE THEY ALWAYS STAY TIGHT.
(NOTE: THE NUTS USED ON THIS ITEM ARE LOCK NUTS, THIS MEANS YOU MUST TIGHTEN
THEM DOWN PAST THE PLASTIC INSERT.)
B
B
A
C
D
D
E
THE SUPPORT LEGS ARE TEST FIT AT THE FACTORY, SO THERE MAY BE MINOR SCRATCHES ON THEM.
THESE WILL NOT BE SEEN AFTER ASSEMBLY.