Deltech Fitness DF830- Lat Attachment - Manual (Page 10)

ASSEMBLE THE FLOATING PULLEY ASSEMBLY USING THE 4 1/2” PULLEYS (O), THE 5”
FLANGES (I), THE M12 x 55MM BOLTS (U), THE 12MM FLAT WASHERS (W), AND THE
12MM LOCKNUTS (V).
FLOATING PULLEY ASSEMBLY
(NOTE: THE NUTS USED ON THIS
BENCH ARE LOCK NUTS, THIS MEANS
YOU MUST TIGHTEN THEM DOWN
PAST THE PLASTIC INSERT.)
O
U
W
U
V
I