Deltech Fitness DF408- Roman Chair/Sit-Up Bench - Manual (Page 3)

(NOTE: THE NUTS USED ON THIS BENCH ARE LOCK
NUTS, THIS MEANS YOU MUST TIGHTEN THEM
DOWN PAST THE PLASTIC INSERT.)
FIRST ASSEMBLE THE FRAME (D) TO THE FOOT (A) USING THE M10 BOLTS (H), THE M10
WASHERS (J), AND THE M10 LOCK NUTS (L). NOW SLIDE THE RUBBER SHOES (F) ONTO THE
FOOT (A).
NEXT ASSEMBLE THE LEG PAD BRACKET (B) TO THE FRAME (D) USING THE M10 BOLTS (H),
THE M10 WASHER (J), AND THE M10 LOCK NUTS (L). THEN SLIDE THE ROLLER PADS (E)
ONTO THE LEG PAD BRACKET (B) USING THE MUSHROOM CAPS (G) TO SECURE THEM.
NOW ASSEMBLE THE SEAT PAD (C) TO THE BODY (A) USING THE M8 BOLTS (I) AND THE M8
WASHERS.
MAKE SURE ALL THE BOLTS ARE TIGHT BEFORE USE. REMEMBER TO CHECK THEM
PERIODICALLY TO MAKE SURE THEY ALWAYS STAY TIGHT.
TOOLS REQUIRED FOR ASSEMBLY
WRENCHES OR METRIC SOCKET SET