M2dtv quick start guide, Rear panel features – DaySequerra Eclipse M2DTV User Manual
Page 2
DaySequerra | 154 Cooper Road, Building 902 | West Berlin, NJ 08091 | +1.856.719.9900 | [email protected] | www.daysequerra.com
M2DTV Quick Start Guide
Home Screen
Rear Panel Features
AES INPUTS: Four 75
Ω
BNC connectors will accept an AES3 digital audio
stream.
AES OUTPUTS: Two 75
Ω
BNC connectors output a pass-through AES
digital audio stream. (Surround Lt Rt– AES 1/2, Stereo Lo Ro - AES 7/8)
AES SYNC/EAS-CAP: Two 75
Ω
BNC connectors allowing iLC2ST to sync
from an external source and accept EAS
HD/SDI (Optional): One input and one passive bypass will allow M2DTV to
measure loudness on 8 channels from group one or group two of an HDSDI
signal.
GPIO: A Female DB-9 connection that allows M2DTV to be monitored and
controlled externally.
Network: Connects M2DTV to an Ethernet network to enable firmware
updates or logging
1. Field #1 – 5.1 Surround Measurement
2. Field #1 - Selection and Indicator
3. Field #2 – Loudness Target Level
4. Field #2 – Selection and Unit Indicator
5. Field #3 – 2.0 Stereo Measurement
6. Field #3 – Selection and Indicator
7. Channel Configuration Icon
8. Edit Preset Icon