darTZeel Audio NHB-108 A version - Manual (Page 11)

darTZeel NHB-108 model one Owner's Manual Page 11 of 17
Put the amplifier on a carpeted surface,
and gently (but firmly, as it is a heavy,
30kg electronic creature) pivot it verti-
cally onto its front handles. Use a protec-
tive cloth as indicated in fig.3 in order to
avoid scratching the inside aluminum
parts
Fig.3 Soft cloth
while using the supplied long nosed pli-
ers (fig. 4),
Fig.4 Supplied tools
Gently turn the fuse holder, as shown in
fig.5, 180° counter clockwise,
Fig.5
and pull it off, as shown in fig. 6
Fig. 6
Then turn again 180° counter clockwise
and let the fuse fall onto the inner side of
the front panel, as shown in fig. 7
Fig. 7
Pick up the fuse with pliers and check
that the glass envelope is dark or black,
indicating a blown fuse. Remove it and
simply install a new fuse in the holder.
Once the new fuse is inserted, push back
the fuse holder and turn it 180° clock-
wise until you feel a slight click.
You’re back in business!
Fuse ratings are:
110-125vAC: 6.3 amps slow blow.
220-240vAC: 3.15 amps slow blow.
Never use improper fuse ratings.
Very great fire risk!
Now you can restore the amplifier back
to its horizontal position and put the
glass cover on, as described in chapter
5.3. "User parameters"
.