beautypg.com

Care and maintenance, Troubleshooting – Danby DCF055A1WP User Manual

Page 8

background image

Care and Maintenance

SOME IMPORTANT RULES FOR THE CORRECT USE OF THE
FREEZER

• Never place hot foods in the freezer.

• Never place spoiled foods in the unit.

• Don’t overload the unit.

• Don’t open the lid unless necessary.

• Should the freezer be stored without use for long periods, it is sug-

gested, after a careful cleaning, to leave the lid open to allow the air
to circulate inside the unit in order to avoid the possibility of
condensation, mold or odors.

6

Troubleshooting

Occasionally, a minor problem may arise, and a service call may not be necessary- use this troubleshooting guide for a
possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free
Number
for assistance.

Tel: 1-800-26-

(1-800-263-2629).

PROBLEM

POSSIBLE CAUSE

SOLUTION

1) Does not work.

• No power to unit.

• Power cord is unplugged.

• Wrong voltage is being used.

• Check connection of power

cord to power source.

• Plug in unit.

• Use proper voltage.

2) Freezer runs

continuously.

• Temperature set too low.

• Lid is not closed.

• Hot food inserted.

• Lid opened too long or too

often.

• Close proximity to heat

source or direct sunlight.

• Set temperature control to

warmer setting

• Close lid securely.

• Be sure food is at room

temperature before inserting.

• Minimize lid openings/

duration.

• Do not place unit close to

heat sources or direct sun

light.

3) Internal temperature

not cold enough.

• No power to unit.

• Power cord is unplugged.

• Temperature set too high.

• Lid is not closed.

• Hot food inserted.

• Lid opened too long or too

often.

• Air flow obstruction.

• Wrong voltage is being used.

• Close proximity to heat

source or direct sunlight.

• Check connection of power

cord to power source.

• Plug in unit.

• Check setting and increase

as needed.

• Close lid securely.

• Be sure that food is at room

temperature.

• Minimize lid openings/

duration.

• Allow room for air to

circulate around unit.

• Use proper voltage.

• Do not place unit close to

heat sources or direct

sunlight.

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

This manual is related to the following products: