Software revision upgrade – Chenbro MPEG4 User Manual
Page 26
26
Software Revision Upgrade
Customers can obtain the up-to-date software from the distributor. An easy-to-use
Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The
upgrade function is opened to the Administrator only. To upgrade the system, follow
the procedures below.
1. Download the firmware file named “FLASH.BIN” from the appropriate product folder.
2. Run the Upgrade Wizard and proceed following the prompts. Refer to the
instructions of the Upgrade Wizard for details.
3. The whole process will finish in a few minutes and it will automatically restart the
system.
If power fails during the writing process of Flash memory, the program in the
memory of the Network Camera may be destroyed permanently. If the Network
Camera cannot restart properly, ask your dealer for technical service.