DVDO iScanPlus V2 - Manual (Page 7)

Silicon Image, Inc.
L L
Scan Plus v2 User Manual
7
,QVWDOODWLRQDQG6HWXS
Typical Configuration
Figure 1 shows a typical configuration for a home theater system. In this setup, an iScan Plus v2
is being used to enhance the output from a DVD player, satellite receiver and a VCR before the
selected signal is sent to a rear screen projection TV, or other progressively scanned display
device. Your configuration may be significantly different from this but the basic functional
blocks – input devices, input cables, iScan Plus v2, output cable and display device – will exist in
your system.
One common deviation from this configuration is to use an A/V Receiver or other video
switching device to switch the video signals from the input devices. In this case, the input devices
shown below will be connected to the inputs of the A/V Receiver. The output of the A/V
Receiver will be then be the only input device to the iScan Plus v2.
DVD Player Satellite Receiver VCR
Progressively
scanned Rear-
screen TV or other
display
Figure 1: Example Home Theater setup
Input Devices
Display Device
iScan Plus v2
Output Cable
Input
Cables
Power Supply
AC
Power
Cable TV
Antenna