Da-Lite Netbook Charging and Storage Cart - Manual (Page 2)

2
Tools Required for Installation
Suggested Methods of Installation
1. Remove contents from carton and examine.
Item Description Qty
1 Cord Wind Bracket 1
2 Divider 39
3 Vinyl Mat 3
4 Cart Assembly 1
5 Caster, Plate 5" W/B 2
6 Caster, Plate 5" W/ Swivel Lock 2
Package Set 1
A Nut, Hex #10-24 4
B Nut, Hex 1/4"-20" 2
C Screw, Mach #10-24 x 1/2" 4
D Screw, HHCS 5/16"-18 x 3/4" 16
E Screw, BHSCS 1/4"-20 x 1/2" 4
F Wrench, Allen 5/32" 1
CAUTION! The user of this product should exercise
caution when moving the cart. Any sudden stop could
cause instability of the cart and could cause serious injury
and/or damage. The cart should always be pushed, never
pulled, by the user. Always push from the side of the cart,
never from the front or back of the cart. This cart is
rated 115 VAC, 60 Hz 12 A.
Required Tools:
- Phillips screwdriver
- 3/8” end wrench
- 7/16” end wrench
- 1/2” end wrench
Listed Accessory – The CT-NS42 is intended for use with Listed
Information Technology Equipment.
The power cord is the disconnect device. The socket-outlet shall
be installed near the equipment and shall be easily accessible.
B A
F
1
3
6
C D E
4
5
2
0.75
0.50 0.50
Maximum Load Per
Shelf Is 60 Pounds
(Four Shelves)