Da-Lite Theater-Lite - Manual (Page 5)

5
6
THEATER-LITE
STORING THE SCREEN
1. Lowering the screen.
Press the screen release button and lower the
screen slowly. Make sure to support the hook
with your hand to lower the screen.
2. Remove the lifting handle from the
hook and store the the screen in the
case.
Lower the screen, as straight as possible until
it clicks and the screen is completely stored
and locked in the case.
CAUTION
· Adjust the lock position of the latch left or right if
it doesn’t match with lock position of the case.
· Do not carry the screen while it is not com-
pletely stored and locked. Doing so may cause
the case to accidentally slip off and discolor or
damage the product.
3. Rote the green knob 90 degrees to lock
the release latch.
CAUTION
· Do not carry the screen while the green knob
is not completely rotated 90 degrees. Doing so
may cause the case to accidentally slip off and
discolor or damage the product.
4. Rotate the upright bar 90 degrees into a
horizontal position.
Make sure that the upright bar is telescoped
completely and then pull it down gently until
it is locked in its holder. If the upright bar is
not locked properly in the holder, telescope it
completely by pressing on the screen release
button and place it back into the holder.
5. Rotate the feet horizontally until they
are aligned with the screen case.
THEATER_lite_e.indd 6 08.10.23 14:23:37
プロセスブラック
6
THEATER-LITE
STORING THE SCREEN
1. Lowering the screen.
Press the screen release button and lower the
screen slowly. Make sure to support the hook
with your hand to lower the screen.
2. Remove the lifting handle from the
hook and store the the screen in the
case.
Lower the screen, as straight as possible until
it clicks and the screen is completely stored
and locked in the case.
CAUTION
· Adjust the lock position of the latch left or right if
it doesn’t match with lock position of the case.
· Do not carry the screen while it is not com-
pletely stored and locked. Doing so may cause
the case to accidentally slip off and discolor or
damage the product.
3. Rote the green knob 90 degrees to lock
the release latch.
CAUTION
· Do not carry the screen while the green knob
is not completely rotated 90 degrees. Doing so
may cause the case to accidentally slip off and
discolor or damage the product.
4. Rotate the upright bar 90 degrees into a
horizontal position.
Make sure that the upright bar is telescoped
completely and then pull it down gently until
it is locked in its holder. If the upright bar is
not locked properly in the holder, telescope it
completely by pressing on the screen release
button and place it back into the holder.
5. Rotate the feet horizontally until they
are aligned with the screen case.
THEATER_lite_e.indd 6 08.10.23 14:23:37
プロセスブラック
6
THEATER-LITE
STORING THE SCREEN
1. Lowering the screen.
Press the screen release button and lower the
screen slowly. Make sure to support the hook
with your hand to lower the screen.
2. Remove the lifting handle from the
hook and store the the screen in the
case.
Lower the screen, as straight as possible until
it clicks and the screen is completely stored
and locked in the case.
CAUTION
· Adjust the lock position of the latch left or right if
it doesn’t match with lock position of the case.
· Do not carry the screen while it is not com-
pletely stored and locked. Doing so may cause
the case to accidentally slip off and discolor or
damage the product.
3. Rote the green knob 90 degrees to lock
the release latch.
CAUTION
· Do not carry the screen while the green knob
is not completely rotated 90 degrees. Doing so
may cause the case to accidentally slip off and
discolor or damage the product.
4. Rotate the upright bar 90 degrees into a
horizontal position.
Make sure that the upright bar is telescoped
completely and then pull it down gently until
it is locked in its holder. If the upright bar is
not locked properly in the holder, telescope it
completely by pressing on the screen release
button and place it back into the holder.
5. Rotate the feet horizontally until they
are aligned with the screen case.
THEATER_lite_e.indd 6 08.10.23 14:23:37
プロセスブラック
Figure 6
Figure 7
Figure 8
Figure 9
1. Lowering the screen. Press the screen release button and lower
the screen slowly. Make sure to support the hook with your
hand to lower the screen (Figure 6).
2. Remove the lifting handle from the hook and store the the
screen in the case. Lower the screen, as straight as possible until
it clicks and the screen is completely stored and locked in the
case (Figure 7).
CAUTION: Adjust the lock position of the latch left or right if it
doesn’t match with lock position of the case.
CAUTION: Do not carry the screen while it is not completely
stored and locked. Doing so may cause the case to accidentally
slip off and discolor or damage the product.
3. Rote the green knob 90 degrees to lock the release latch
(Figure 8).
CAUTION: Do not carry the screen while the green knob is not
completely rotated 90 degrees. Doing so may cause the case to
accidentally slip off and discolor or damage the product.
4. Rotate the upright bar 90 degrees into a horizontal position.
Make sure that the upright bar is telescoped completely and
then pull it down gently until it is locked in its holder. If the
upright bar is not locked properly in the holder, telescope it
completely by pressing on the screen release button and place
it back into the holder.
5. Rotate the feet horizontally until they are aligned with the
screen case (Figure 9).
Storing the Screen
6
THEATER-LITE
STORING THE SCREEN
1. Lowering the screen.
Press the screen release button and lower the
screen slowly. Make sure to support the hook
with your hand to lower the screen.
2. Remove the lifting handle from the
hook and store the the screen in the
case.
Lower the screen, as straight as possible until
it clicks and the screen is completely stored
and locked in the case.
CAUTION
· Adjust the lock position of the latch left or right if
it doesn’t match with lock position of the case.
· Do not carry the screen while it is not com-
pletely stored and locked. Doing so may cause
the case to accidentally slip off and discolor or
damage the product.
3. Rote the green knob 90 degrees to lock
the release latch.
CAUTION
· Do not carry the screen while the green knob
is not completely rotated 90 degrees. Doing so
may cause the case to accidentally slip off and
discolor or damage the product.
4. Rotate the upright bar 90 degrees into a
horizontal position.
Make sure that the upright bar is telescoped
completely and then pull it down gently until
it is locked in its holder. If the upright bar is
not locked properly in the holder, telescope it
completely by pressing on the screen release
button and place it back into the holder.
5. Rotate the feet horizontally until they
are aligned with the screen case.
THEATER_lite_e.indd 6 08.10.23 14:23:37
プロセスブラック
DL-0291_Rev2_Theater Lite Instructions.indd 5 11/5/2014 3:15:38 PM