Custom Autosound USA-5 - Manual (Page 7)

1 PUSH-POWER/PUSH-VOLUME CONTROL
2. PUSH-BASS/PUSH-TREBLE/PUSH-BALANCE
. / PUSH-FADER CONTROL
3. TAPE EJECT CONTROL
4. CASSETTE DOOR
5. CLOCK/FREQUENCY DISPLAY
6. TAPE FAST FORWARD CONTROL
7. TAPE REWIND CONTROL
8. TAPE PROGRAM SELECT CONTROLS
9. SCAN AUTO TUNING/TIME ADJUST
10. MANUAL UP-DOWN CONTROL
11. TAPE OR CD AND RADIO MODE SELECT
. BUTTON
12. TUNER LOCAL/DISTANCE MODE SELECT
13. AS/PS [ STORE AND PRESET
. MEMORY SCAN] BUTTON
14. CD TRACK REPEAT/RADIO PRE-SET 6
15. CD TRACK INTRO/SEEK DOWN AUTO-
. TUNING AND RADIO PRE-SET5 BUTTON
16. CD TRACK FAST FORWARD/SEEK UP AUTO-
. TUNING AND RADIO PRE-SET4 BUTTON
17. CD DISC UP/RADIO PRE-SET3
18. CD DISC DOWN/RADIO PRE-SET2
19. CD TRACK SHUFFLE/RADIO PRE-SET1
20. TIME ADJUST BUTTON
21. CD CHANGER ON/OFF&MODE CHANGE
22. AM1/AM2/FM1/FM2/FM3 BAND SELECT
. (CDC— RADIO—CDC)
23. USA-EUROPEAN FREQUENCY SELECTOR
6 9
The- USA-5 has built in feature of automatically scanning the presets and automatically
storing new presets. Control this feature by using the Preset Scan and Auto Store
Button(13)- “A/PS”.
1. Pre-set Scan
Momentarily pressing the P/S button(13) will provide recalling stations that are pro-
grammed into the 6 preset buttons.The receiver will search for the station programmed
on preset button 1 and hold that station for 5 seconds and the start searching again for
the station programmed on preset button 2.The receiver will continue to search until
momentarily pressing the P/S button again or any other button on the face of the radio.
NOTE: If you not have pre-programmed stations on each preset button, the radio will
search through its default stations.These defaults may not correspond to any radio sta-
tion in your area,which will make the radio continually search for a station.
2. Auto Store(Automatic Preset Memory System)
Start by pressing and holding the P/S button for at least 1 second.The radio will then
start to search for stations beginning at the frequency currently being received,The radio
searches for stations in ascending order of the frequency,The preset memories are
updated once all of the frequencies are searched through
CD Changer Operation
1. With CD magazine in place in changer, press the CD button (21). The receiver will go
.
. into CD mode. 17 -
2. To select a disc press CD up (17) or CD down (18) until the desired disc number is . .
. shown on the right side of the LCD display (5).
3. To fast forward through a track, press button (15) and hold.
4. To fast rewind through a track, press button (16) and hold.
5. To skip to the next track, turn knob (10) clockwise .To go to the previous track, turn
. .
. knob (10) counter clockwise.
6. To repeat play the current track, press (14) RPT will show on the LCD display.
7. To RANDOM play tracks on the disc, press(19) .This will play tracks randomly on the
.
. current disc. RDM will show on the LCD display.
8. To change the mode to RADIO, press the CD button (21).
Cassette Playing Basic Operation
1. Insert a cassette into the Cassette (4) .The open end of the cassette should be facing
. the right side of the USA-(5) One of the Tape Direction Indicators (25) on the left side .
. of LCD Display(5).”Tape will be visible on the LCD display.
2. Adjust the Volume (1), to the desired position.
3. Determine which direction the tape is traveling by viewing the Tape Direction
. . . . . .
. Indicator(25).
4. To fast for ward the tape,press the Tape Advance Control(6 or 7)with the two arrows . .
. pointing in the same direction as the tape direction indicator.