Custom Autosound Slidebar Series Radios User Manual
Page 8
Function See FIG.3
Radio Mode
USB/CDC Mode
Power
On/Off
1
Press the left front knob to turn the unit on. Look for CUSTOM
AUTOSOUND ON POWER UP
Press the left front knob to turn the unit off. The LCD display will
show GOODBYE for your confirmation
Volume
1
Turn the left front knob to adjust the volume attenuation
between 0~45 (Min/Max). 14 is the default turn-on level
.
Mode
2
Turn the left rear knob clockwise to select from an available lis-
tening source: Radio, USB, CDC, iPod or AUX.
TA
2
Turn and hold the left rear knob clockwise to turn On/Off the
Traffic Announcement function (FM Only) if supported by the
station. TA will blink on the LCD
Clock On
2
Turn the left rear knob counter-
clockwise to activate the clock
on-screen feature.. When you
turn the left rear knob counter-
clockwise the Clock is dis-
played for a few seconds. Turn
and hold the left rear knob
counter-clockwise while dis-
playing Clock and “Hour Adjust”
mode is activated for a few sec-
onds. During the mode turn the
left front knob to adjust the
hour, turn the left rear knob
counter-clockwise during “Hour
Adjust” mode and “Minute
Adjust” mode is activated for a
few seconds. During this mode,
turn the left front knob to adjust
the minute.
Turn the left rear knob counter-
clockwise to toggle and view
artist, album, title information.
View Song
Info/
Clock
2
Preset 1
Recall/
Store
3
Press to select the #1 radio
pre-set.
Press and HOLD to store pre-
set 1 into memory.
Press to play/pause file play-
back on USB / CDC
Play/Pause
7
MIDRANGE
Use this function to make a more
detailed boost or cut adjustment of
midrange (vocal) frequencies as fol-
lows:0.5K/1.0K/1.25K/1.5KHz.Default
setting is 1.0KHz.This is a very useful
mode for making very specific tonal adjustments. When selecting one of these
0.5K/1.0K/1.25K/1.5KHz points, array changes to the prior MID menu settings on page 10
(-12 to +12) will boost or cut at the selected frequency setting chosen in this menu.
TREBLE
Use this function to make a detailed
boost or cut adjustment of treble fre-
quencies as follows; 7.5K
/10.0K/12.5K/15.0K. Default setting is
10.0KHz.When selecting one of these
7.5K /10.0K/12.5K/15.0K points, any
changes to the prior TRE menu settings on page 10 (-12 to +12) will boost or cut at the
selected frequency setting chosen in this menu. This is a very useful mode for making very
specific tonal adjustments.
Accessing the sub-menu system menu:
1. Press and hold the right front knob for 2 seconds, then release, to access
the sub-menu system.
2. Repeatedly press and release the front right knob to scroll through the avail
able menu options.
3. Turn the left front knob right or left to select a value for the chosen menu
option.
4. Press and release the right front knob repeatedly to move to the next function
desired, or do nothing and the menu will revert to the current source
display.
Sub-Menu Options
DIMMER
Use this menu option to switch the LCD
brightness between 0 to 7 ,Turn the left
front knob clockwise or counter-clockwise
to make your selection.
(LCD DISPLAY COLOR)
Select the desired color preset. By
default, the LCD lighting will White.
Available color options include WHITE,
RED , GREEN, BLUE, CYAN, YELLOW,
PINK. When you selected the User Mode,
the LCD lighting will alternate between all
colors within 10 seconds.
AUTO SEEK
This function allows you to select auto
seek tuning or manual tuning when you
turn the right front knob to the right or left
when listening to the radio. The factory
default setting is AUTO SEEK. Turn the
left front knob clockwise or counter-clock-
12
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN
Slidebar Manual_new_USA-5_manual_peter 1/23/2014 9:19 AM Page 8