Coda CSiB Integrated Amplifier - Manual (Page 6)

INSTALLATION & USE 5
REMOTE OPERATION
The CSib can be operated by remote control. The MX-
350 Learning Remote is included with the amplifier. The
relevant pages of the remote interface are described
below. For instructions on using the MX-350 itself see the
manual included with the remote.
The five buttons to the right of the LCD are used to select
the functions shown in the display window. Select [CSI]
to control the CSib. The same remote is used for both the
CSib and CSi.
VOL Changes audio level
MUTE Mutes the amplifier
ON / OFF Turns bias on and off
PAGE Cycles through available
remote commands.
DISC VIDEO AUX1 AUX2 Selects audio input.
BAL Cycles through audio level
adjustment modes.
MONIT Selects audio input.
SUBWF Mutes the amplifier
BAL Cycles through audio level
adjustment modes.
gLOBAL CONTROLS
CSI PAgE 1
CSI PAgE 2
OFF ON
MAIN
VOL CH
MUTE
GUIDE
PREV
CH
OFF ON
MAIN
VOL CH
MUTE
GUIDE
PREV
CH
OFF ON
MAIN
VOL CH
MUTE
GUIDE
PREV
CH
CODA
CSI
CSI
CSI
DISC
VIDEO
AUX1
AUX2
BAL
MONIT
SUBWF
BAL