Coda 60.0 Mono Amplifier - Manual (Page 4)

WARNING: Please ensure that the power switch is turned OFF while you are connecting the
r. Connecting or disconnecting cables while the is powered on could
cause damage to your speakers.
INITIAL SETUP 2
2 2
3 4 5
1
PUSH
6
8
USE ONLY SPECIFIED FUSE TYPE
NEG. OUTPUT POS. OUTPUT
120
NOTE:
directly befor
The connectors are clearly marked on the back panel of the ampli er.
1. Audio input can be by balanced or unbalanced interconnects. Connect only one type
of input at a time, connecting balanced and unbalanced connectors can cause damage
or distortion.
between the positive and negative posts or post pairs.
3. The AC line input should be connected to an AC outlet with the power cable provided
4. The fuse and voltage selector unit houses a 5x20mm slow-blow fuse and a voltage
selector cartridge. Ensure that the voltage, visible through a small window next to the AC
input, is set to the appropriate voltage for your country. When changing voltages, ensure
that the power cable is disconnected fr r.