Clay Paky STAGE ZOOM 1200 SV - Manual (Page 13)

0
1
2
3
4
5
6
7
8
9
10
BIT % EFFECT
255 100 COLOUR EXCLUDED
0 0.0 COLOUR INSERTED
CHANNEL 14
RED
CHANNEL 15
GREEN
CHANNEL 16
BLUE
1 2 3 4 5 6 7 8 9 10 1112
OFF
ON
0
1
2
3
4
5
6
7
8
9
10
BIT % EFFECT
255 100 COLOUR INSERTED
0 0.0 COLOUR EXCLUDED
CHANNEL 14
CYAN
CHANNEL 15
MAGENTA
CHANNEL 16
YELLOW
OFF
ON
1 2 3 4 5 6 7 8 9 10 1112
13
• ROTATING GOBO CHANGE - channel 12
0
1
2
3
4
5
6
7
8
9
10
208 - 256 81.7 - 100 GOBO 4
156 - 207 61.2 - 81.2 GOBO 3
104 - 156 41.0 - 61.0 GOBO 2
52 - 103 20.5 - 40.5 GOBO 1
BIT % EFFETTO
0 - 51 0.0 - 20.0 WHITE
• GOBO ROTATION - channel 13
0
1
2
3
4
5
6
7
8
9
10
STOP
540 °
360 °
0 °
STOP
FAST ROTATION (120 rpm)
SLOW ROTATION (2 rph)
SLOW ROTATION (2 rph)
FAST ROTATION (120 rpm)
BIT % EFFECT
191 - 192 74.7 - 75.0
255 100
193 75.0
190 74.2
128 50.0
0 0.0
POSITION 540 ° 127 49.7
POSITION 450 °
POSITION 360 °
POSITION 270 °
POSITION 180 °
POSITION 90 °
POSITION 0 °
105 41.7
84 33.0
63 24.7
42 16.2
21 8.2
• COLOUR MIXING - channel 14 - 15 - 16
Continua / Continue ➔
RGB system enabled (option 8 OFF)
CMY system enabled (option 8 ON)
• FIXED GOBO CHANGE - channel 11
Operation with option 2 OFF
BIT % EFFECT
0 - 47 0.0 - 18.2 WHITE 0
1
2
3
4
5
6
7
8
9
10
204 - 255 80.0 - 100 GOBO 4
152 - 203 59.5 - 79.5 GOBO 3
100 - 151 39.0 - 59.0 GOBO 2
48 - 99 18.7 - 38.7 GOBO 1
OFF
ON
1 2 3 4 5 6 7 8 9 10 1112
Operation with option 2 ON
BIT % EFFECT
0 0.0 WHITE
OFF
ON
1 2 3 4 5 6 7 8 9 10 1112
0
1
2
3
4
5
6
7
8
9
10
255 100 GOBO 4
192 75.0 GOBO 3
128 50.0 GOBO 2
64 25.0 GOBO 1
• LAMP CONTROL (only with option 3 ON) - channel 17
0
1
2
3
4
5
6
7
8
9
10 LAMP ON (full power)
LAMP ON (full power)
BIT % EFFECT
256 100
128 50.0
0 0.0
127 49.7 LAMP ON (half power) *
LAMP OFF
ON
ON
ON
OFF
LAMP CONTR
OL
OFF
ON
1 2 3 4 5 6 7 8 9 10 1112
LAMP ON (half power) * 64 25.0
63 24.7 LAMP OFF
ON
OFF
* Il funzionamento della modalità half power/half noise è abilitato solo dopo che la
lampada ha funzionato in full power per un tempo di almeno 10 minuti dopo
l’accensione del proiettore o lo spegnimento della lampada. Prima che siano trascorsi i
suddetti 10 minuti, ai livelli dal 25.0% al 49.7% il proiettore funziona in full power.
* Operating in half power/half noise mode is only enabled after the lamp has been
running at full power for at least 10 minutes after the projector was switched on or the
lamp switched off. The projector operates at full power at levels from 25.0% to 49.7%
before these 10 minutes have elapsed.
* Le fonctionnement en modalité half power/half noise n’est autorisé qu’après que la
lampe a fonctionné au moins 10 minutes en full power après que le projecteur a été
allumé ou que la lampe a été éteinte. Avant que le temps susmentionné de 10 minutes
soit écoulé, aux niveaux de 25,0% à 49,7%, le projecteur fonctionne en full power.
* Die Funktionsweise in der Betriebsart half power/half noise wird nur dann aktiviert,
wenn die Lampe mindestens 10 Minuten lang in full power Betrieb war, nachdem der
Projektor eingeschaltet oder die Lampe ausgeschaltet worden ist. Bevor die
obengenannten 10 Minuten abgelaufen sind, funktioniert der Projektor auf dem Stand
zwischen 25.0% und 49.7% in full power.
* El funcionamiento en el modo half power/half noise está habilitado sólo después que
la lámpara ha funcionado en full power por un tiempo mínimo de 10 minutos después
del encendido del proyector o el apagado de la lámpara. Antes de que pasen los 10
minutos, en los niveles del 25.0% al 49.7% el proyector funciona en full power.
I
GB
D
E
F