Dixon 1857-0599 - Manual (Page 31)

Page 31
OIL FILL:
1. Push the valve body
in and twist into the
detent notch.
2. Clean any spilled oil from engine and chassis.
3. Refill engine with type, and quantity of oil recommended by the engine manufacturer in
engine literature.
NOTE: Oil changes require replacement of the oil filters. These filters can be obtained from your
authorized engine dealer.
The use of any other oil filter may cause damage to the engine.
Briggs & Stratton Oil Filter: P/N 492 932 Kohler Oil Filter: P/N 52 050 02
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
-PROTECT YOUR ENVIRONMENT-
Open Closed
CHASSIS: (7) grease zerks used on 42" & 50"
LOCATIONS: (1) each front wheel caster tube and front
wheel hub. (1) each mower deck hub.
SERVICE INTERVALS: Every 50 hours of operation
RECOMMENDED GREASE: Name brand wheel bearing or multi-purpose grease
Lubricate each front wheel to allow even distribution of grease within the
wheel, rotate or spin each front wheel after (3) pumps of the grease gun.
Repeat process until the appearance of grease is noted completely around
each caster axle.
LUBRICATION:
CARE AND MAINTENANCE
BRAKE SYSTEM: Use penetrating lubrication to keep all brake parts functioning
smoothly. Lubricate at locations illustrated.