Avalue XTX-PNV - Manual (Page 51)

User’s Manual
XTX-PNV User’s Manual 51
3.6.4.1 Boot settings configuration
Use Boot Settings Configuration menu to configure advanced boot options.
Item Options Description
Quick Boot [Enabled]
Disabled,
Enabled ( D EFAULT
)
This item allows BIOS to skip certain tests
while booting. This will decrease the time
needed to boot the system.
Quiet Boot [Disabled]
Disabled ( D EFAULT
)
Enabled
If set to Disabled, the BIOS displays normal
POST messages. If Enabled, an OEM Logo is
shown instead of POST messages.
AddOn ROM Display Mode
[Force BIOS]
Force BIOS ( D EFAULT
)
Keep Current
This option allows add-on ROM (read-only
memory) messages to be displayed.
Bootup Num-Lock [On]
On ( D EFAULT
)
Off
This option allows the number Lock setting to
be modified during boot up.
PS/2 Mouse support [Auto]
Auto ( D EFAULT
)
Disabled,
Enabled
This interface utilizes a bidirectional serial
protocol to communicate with the computer's
auxiliary device controller
Wait For “F1” If Error
[Enabled]
Disabled,
Enabled (
D EFAULT
)
When set to enable, the system waits for the
F1 key to be pressed when error occurs.
Hit “DEL” Message Display
[Enabled]
Disabled,
Enabled ( D EFAULT
)
This BIOS feature allows you to control the
display of the Hit “DEL” to enter setup
message during memory initialization.
Interrupt 19 capture
[Disabled]
Disabled (
D EFAULT
)
Enabled
This item allows options for ROMs to trap
interrupt 19.