Avalue EPS-QM77E - Manual (Page 10)

EPS Series
10 EPS Series Quick Reference Guide
2.3 Installing Hard Disk & Memory (EPS-QM77E)
Step 1. Remove 8 screws from the bottom of your system.
Step 2. Remove the chassis cover.
Step 1. Slide HDDs into its bracket until properly seated.
Step 2. Secure HDDs by means of 8 screws (4 for each).
Step 3. Connect necessary cables to HDDs.
Step 4. Slide the DDR3 SODIMM into the memory socket and press it down until properly seated.