Avalue SEPC-CDT - Manual (Page 11)

Quick Reference Guide
SEPC-CDT Quick Reference Guide 11
2.1 SEPC-CDT connector mapping
2.1.1 VGA connector (VGA)
PIN Signal PIN Signal PIN Signal
1 R 6 GND 11 NC
2 G 7 GND 12 DATA
3 B 8 GND 13 HSYNC
4 NC 9 +5V 14 VSYNC
5 GND 10 GND 15 CLK
2.1.2 Gigabit LAN (RJ-45) connector (LAN)
Note:
This port allows Gigabit connection to a Local
Area Network (LAN) through a network hub.
Refer to the table below for the LAN port LED
indications.
Speed
Status
Speed
Description
ACT/Link
Status
ACT/Link
Description
OFF
10Mbps
connection
OFF Disconnection
Orange
100Mbps
connection
Green On Linked
Orange
1Gbps
connection
Green
Blinking
Data activity