Avalue EMX-H61B - Manual (Page 34)

EMX-H61B User ’s Manual
34 EMX-H61B User’s Manual
Wake on LAN
Disabled[Default]
Enabled
Enable system to wake from S5 using LAN
wake event.
Power-Loss State
Power Off[Default]
Power On
Keep Last State
Specify what state to go to when power is
re-applied after a power failure.
Poweron By RTC
Disabled[Default]
Enabled
Enable or disable System wake on alarm
event. When enabled, System will wake on the
hr::min::sec specified.
3.6.2.6 Super IO Configuration
You can use this item to set up or change the Super IO configuration for FDD controllers,
parallel ports and serial ports.
Item Description
Serial Port 0 Configuration Set Parameters of Serial Port 0 (COMA).
Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMB).