Avalue EMX-PNV - Manual (Page 39)

User ’s Manual
EMX-PNV User ’s Manual 39
3.6.2.2 IDE configuration
Item Options Description
ATA/ IDE Configuration
Disabled,
Compatible,
Enhanced
This can be configured as Disabled,
Compatible or Enhanced.
Configure SATA as
IDE,
AHCI
Use this option to configure the SATA port as
an IDE drive or a SATA drive (AHCI mode)
Primary/ Secondary/ Third/
Fourth IDE Master
Disabled,
Enabled
Use the IDE Master and IDE Slave
configuration menu to view both primary and
secondary IDE device details and configure
the IDE devices connected to the system.
Primary/ Secondary/ Third/
Fourth IDE Slave
Disabled,
Enabled
Use the IDE Master and IDE Slave
configuration menu to view both primary and
secondary IDE device details and configure
the IDE devices connected to the system.
Hard Disk Write Protect
Disabled,
Enabled
Disable/ Enable device write protection. This
will effective only if device is accessed through
BIOS.
IDE Detect Time Out (Sec)
0/ 5/ 10/ 15/ 20/ 25/ 30/
35
This allows you to select the time out value for
detecting ATA/ ATAPI devices.
ATA (PI) 80Pin Cable Detection
Host & Device,
Host,
Device
This item allows you to select ATA cable
detection mode.