Avalue EPI-LX800 - Manual (Page 19)

Quick Installation Guide
EPI-LX800 Series Quick Installation Guide 19
2.3.14 LCD Inverter Connector (JBKL)
Signal PIN
+12V 1
GND 2
ENBKL 3
VR 4
+5V 5
Note:
For inverters with adjustable Backlight function, it is possible to control the
LCD brightness through the VR signal controlled by
JVR. Please see the
JVR section for detailed circuitry information.
2.3.14.1 Signal Description – LCD Inverter Connector (JBKL)
Signal Signal Description
VR Vadj = 0.75V ~ 4.25V (Recommended: 4.7KΩ, >1/16W)
ENBKL LCD backlight ON/OFF control signal
2.3.15 CD-ROM Audio Input Connector (JCD)
Signal PIN
NC 1
CD_L 2
GND 3
CD_R 4