AValon RF TX618M - Manual (Page 11)

AVALON RF, INC. Page 9
TX418M/TX518M/TX618M User’s Guide & Operating Manual
3. Operating the transmitter.
Before applying power, make sure all connectors and all antennas
are hooked up.
NOTE
The transmitter will not transmit unless it has an antenna.
3.1 The transmitter has two operator controls and one indicator:
a) Channel select.
Units that have a manual synthesizer have a 4 position dip switch
that selects a channel number (from 1 to 16). The preset channel
numbers are defined by a label on the side wall of the transmitter.
b) On/Off